CO Alarm FAQs
Find our answers to commonly asked product questions here.
Portable 3-in-1 carbon monoxide alarm for camping, vans, and outdoor safety.
CO Alarm 3-in-1
The NESTOUT CO Alarm is a portable carbon monoxide detector designed for camping, road trips, van life, RV travel, and other outdoor adventures. It detects CO generated by charcoal, camp stoves, generators, and fuel burning equipment and alerts you before levels become dangerous.
IP54 dust and water resistant, backlit LCD, foldable rear stand, and USB-C rechargeable with approximately five days of continuous use per charge.
In addition to CO concentration, the backlit screen displays temperature (14°F to 122°F), and humidity (20% to 90% RH) in a single unit. Peak CO tracking captures the highest level reached during each detection cycle so you know exactly what happened while you were away from camp.
Portable Carbon Monoxide Detector for Travel
The detector is compact enough to carry in a camping bag, suitcase, glove compartment, or van storage area. The included storage pouch helps protect it between trips.
Its foldable rear stand provides several placement options. You can set it on a raised table, shelf, or gear container, or hang it using the built-in hook. This flexibility makes it useful as a portable carbon monoxide detector for travel, hotels, cabins, campers, vans, and temporary accommodations.
Rechargeable Power for Longer Trips
A full charge provides approximately five days of continuous operation. The built-in lithium-ion battery recharges through USB-C in approximately 2.5 hours when used with a compatible 5V/1A or higher charger.
You can keep it topped off on longer trips with any NESTOUT power bank or power station.
Where to Place the CO Detector?
Always position above head height, near where you sleep or spend the most time. CO rises with warm combustion gases, and a detector placed too low may not alert you quickly enough. Use the foldable stand on an elevated surface or clip the built in hook to a tent ridge or gear loop. Never block the air inlet on the back of the unit.
Model Name: CO Alarm 3-in-1
Model Number: OD-NESTCOM1BK
DETECTION
CO Measurement Range: 0 to 999 ppm (1 ppm increments)
CO Measurement Accuracy: ±10%
CO Sensor: Japan made Figaro Engineering sensor
CO Self Diagnosis: Yes (at startup and every 2 hours)
Accuracy Enhancement: Temperature compensation, long term drift compensation, battery voltage compensation
Caution Alert: 50 to 99 ppm sustained 15+ min, or 100 ppm and above
Danger Alert: 200 ppm and above
ENVIRONMENT
Temperature Range: 14°F to 122°F / -10°C to 50°C (1° increments)
Temperature Accuracy: ±3°F / ±2°C
Humidity Range: 20% to 90% RH (1% increments, non condensing)
Humidity Accuracy: 35% to 75%: ±5%; outside that range: ±10%
POWER
Battery: Built in lithium ion rechargeable
Continuous Operation: Approx. 5 days per full charge
Rated Input: 5V / 1A
Charging Port: USB Type C
Charge Time: Approx. 2.5 hours (5V/1A or higher)
CONSTRUCTION
Ingress Protection: IP54 (dust and water resistant)
Display: Backlit LCD
Alarm Volume: 3 levels (high / low / mute)
Stand: Foldable rear stand
Operating Conditions: 14°F to 122°F, 10% to 90% RH, non condensing
Storage Conditions: 14°F to 140°F, 10% to 90% RH, non condensing
Dimensions: 2.1 in x 0.9 in x 3.6 in (W x D x H)
Weight: Approx. 3.1 oz (88g)
Color: Black
Warranty: 1 Year
Compatibility:
Designed for NESTOUT 5000mAh, 10000mAh, and 15000mAh batteries, and works with any USB Type-C power bank or wall charger for flexible charging anywhere.
Power banks and additional accessories are sold separately.
This product is designed to help detect carbon monoxide. It does not prevent CO exposure, reduce CO levels, or replace proper ventilation. Always ensure adequate airflow when using stoves, lanterns, charcoal, generators, or any fuel burning equipment in enclosed spaces. The CO Alarm is one part of a broader safety practice, not a substitute for ventilation, responsible equipment use, or emergency preparedness. If the alarm sounds, evacuate immediately, ventilate the area, extinguish open flames, and contact emergency services if needed.
Not intended for long term monitoring beyond battery life, use in place of a fire alarm, industrial applications, or regulatory compliance.
Carbon monoxide is colorless and odorless making it difficult to detect without the right equipment. It builds up fast in enclosed spaces when you run a stove, lantern, or generator. This compact travel carbon monoxide detector helps you monitor conditions inside tents, campers, vans, RVs, tarps, and other enclosed or partially enclosed spaces.
CO concentration, temperature, and humidity all displayed on a single backlit LCD. Peak CO tracking captures the highest reading during each detection cycle so you can review conditions even after levels drop. Monitor your environment at a glance without carrying three separate devices.
At just 3.1 oz, the alarm is easy to bring along without adding bulk to your gear. Use the foldable rear stand to place it on a camp table, prop it near your sleeping area, or hang it from a gear loop. The included storage pouch keeps it protected and ready for your next trip.
Find our answers to commonly asked product questions here.
The NESTOUT CO Alarm detects carbon monoxide, or CO, produced by burning fuels such as charcoal, propane, gasoline, wood, and kerosene. It does not detect carbon dioxide, natural gas, smoke, or radon.
This product does not monitor CO2 nor does it contain a CO2 sensor. Carbon monoxide and carbon dioxide (CO2) are different gases and require different types of sensors. The CO Alarm measures carbon monoxide (CO), humidity, and temperature.
When does the alarm go off?
The alarm triggers at two levels. A caution alert activates when CO concentration stays between 50 and 99 ppm for more than 15 minutes, or when it reaches 100 ppm or above. A danger alert activates at 200 ppm or above.
What should I do if the CO Alarm goes off?
Move to fresh air immediately. Ventilate the area. Extinguish open flames or shut down fuel burning equipment. Contact emergency services if anyone shows symptoms such as headache, dizziness, or nausea.
Always above head height, near where you sleep or spend the most time. CO rises with warm combustion gases, so placing the detector too low can delay detection. Use the foldable stand on a raised surface or hang it from the built-in hook. Make sure the air inlet on the back is not blocked.
Yes. The portable design, IP54-rated housing, rechargeable battery, backlit display, and flexible placement options make it suitable for camping.
Note: When using fuel-burning equipment its important to have adequate ventilation and follow all equipment safety instructions.
The CO Alarm is IP54 rated, which means it resists dust and splashes. It is not designed for submersion. Keep it sheltered from heavy rain or standing water.
A full charge provides approximately five days of continuous operation. The unit charges via USB C in about 2.5 hours using a 5V/1A or higher charger, including any NESTOUT power bank or power station.
The alarm automatically checks sensor health at startup and every two hours of continuous operation. If a fault is detected, it alerts you so you know the sensor needs attention rather than continuing to rely on a potentially compromised reading.
Yes. The alarm offers three volume levels: high, low, and mute. On mute, the LCD still displays CO readings and visual warnings, but audible alerts are silenced.
Yes. The unit displays real time temperature (14°F to 122°F) and humidity (20% to 90% RH) alongside CO readings. All three appear on the same backlit LCD.
Yes. The CO Alarm is designed for any enclosed or semi enclosed space where fuel burning equipment is in use, including vehicles, vans, RVs, tents, and tarps.